Pobierz podręcznik dla modelu
POLYCOM SOUNDPOINT IP 321 - Telefon komórkowy

Jeśli szukasz instrukcji: Telefon komórkowy POLYCOM SOUNDPOINT IP 321 - masz rację. Na tej stronie możesz pobrać ją za darmo. Aby uzyskać szczegółowe informacje, zapoznaj się z poniższymi instrukcjami.

Plik jest dostępny w ciągu kilku sekund, jak szybkość połączenia z komputerem.
Wierzymy, że nasza strona pomocy, a my będziemy się cieszyć, jeśli odwiedzenia nas w przyszłości.
PDF Pobierz instrukcję obsługi Telefon komórkowy POLYCOM SOUNDPOINT IP 321
Telefon komórkowy POLYCOM SOUNDPOINT IP 321 Telefon komórkowy POLYCOM SOUNDPOINT IP 321


Linki sponsorowane



Jest instrukcja pomocna?
Prosze kliknij tutaj:

Rozmiar pliku: 1580 KB (format pliku: pdf)
User Guide for the Polycom SoundPoint IP 32x/33x Phone

SIP 3.1.3 | June 2009 | 1725-11241-001 Rev. E


========1========

Trademark Information
POLYCOM, the Polycom "Triangles" logo and the names and marks associated with Polycom's products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient's personal use, without the express written permission of Polycom.

Patent Information
The accompanying product is protected by one or more U.S. and foreign patents and/or pending patent applications held by Polycom, Inc.

Disclaimer
Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages for certain products supplied to consumers, or the limitation of liability for personal injury, so the above limitations and exclusions may be limited in their application to you. When the implied warranties are not allowed to be excluded in their entirety, they will be limited to the duration of the applicable written warranty. This warranty gives you specific legal rights which may vary depending on local law.

Copyright Notice
Portions of the software contained in this product are: Copyright 1998, 1999, 2000 Thai Open Source Software Center Ltd. and Clark Cooper Copyright 1998 by the Massachusetts Institute of Technology Copyright 1998-2003 The OpenSSL Project Copyright 1995-1998 Eric Young ([email protected]). All rights reserved Copyright 1995-2002 Jean-Loup Gailly and Mark Adler Copyright 1996-2004, Daniel Stenberg, Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

2009 Polycom, Inc. All rights reserved. Polycom, Inc. 4750 Willow Road Pleasanton, CA 94588-2708 USA No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Polycom, Inc. Under the law, reproducing includes translating into another language or format. As between the parties, Polycom, Inc., retains title to and ownership of all proprietary rights with respect to the software contained within its products. The software is protected by United States copyright laws and international treaty provision. Therefore, you must treat the software like any other copyrighted material (e.g., a book or sound recording). Every effort has been made to ensure that the information in this manual is accurate. Polycom, Inc., is not responsible for printing or clerical errors. Information in this document is subject to change without notice.
ii


========2========

About This Guide

Thank you for choosing the SoundPoint IP 32x/33x SIP, a full-duplex, hands-free phone. This unit provides business telephony features and functions such as multiple call appearances, call hold, transfer, and conference over an IP network. This User Guide provides everything you need to quickly use your new phone. Verify with your system administrator that the network is prepared for configuring your SoundPoint IP 32x/33x SIP phone. As well, read the Parts List and Regulatory Notices sections in this guide before you set up and use the SoundPoint IP 32x/33x SIP phone. This information can also be found at http://www.polycom.com/support/voip/

Changes to this Guide
Major updates have occurred to the following sections since the previous edition: Searching the Corporate Directory on page 2-20

iii


========3========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

iv


========4========

Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Changes to this Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

1 Getting Started with Your SoundPoint IP 32x/33x Phone . . 11
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Assembling Your SoundPoint IP 32x/33x Phone . . . . . . . . . . . . . . . . . . . . 13 Connecting Network and Power Source . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting the Handset and Optional Headset . . . . . . . . . . . . . . . . . 15 Attaching the Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Registering the Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Features of Your SoundPoint IP 32x/33x Phone . . . . . . . . . . . . . . . . . . . . 19 Before You Use Your SoundPoint IP 32x/33x Phone . . . . . . . . . . . . . . . . 111

2 Customizing Your SoundPoint IP 32x/33x Phone . . . . . . . . 21
Configuring Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Appearance of Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Headset Memory Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Headset Hookswitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Ring Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Language Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Directory Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Managing Call Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Managing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Adding Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Editing Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 Deleting Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Placing a Call to a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 Searching For a Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

v


========5========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Managing Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Distinguishing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216 Rejecting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 Diverting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 System Customizations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Supporting Multiple Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 Supporting Multiple Line Keys Per Line . . . . . . . . . . . . . . . . . . . . . . 219 Supporting Shared Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

3 Using the Basic Features of Your SoundPoint IP 32x/33x Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Placing a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Redialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Placing a Call on Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Setting Up Conferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Transferring Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310 Forwarding Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 312 Enabling Do Not Disturb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Assigning Speed Dial Indexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Using Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316

4 Using the Advanced Features of Your SoundPoint IP 32x/33x Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using Automatic Call Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Using Multiple Call Appearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Using Buddy Lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Presence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Managing Buddies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Integrating With Microsoft Live Communications Server 2005 . . . . 47 Restarting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

5 Troubleshooting Your SoundPoint IP 32x/33x Phone . . . . . 51
Power and Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Access to Screens and Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
vi


========6========

Contents

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Testing Phone Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Regulatory Notices . . . . . . . . . . . . . . . . . Regulatory Notices1 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Index1 End-User License Agreement for Polycom Software

vii


========7========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

viii


========8========

1
Getting Started with Your SoundPoint IP 32x/33x Phone

This chapter provides basic installation instructions and information for obtaining the best performance with the SoundPoint IP 32x/33x phone. The SoundPoint IP 32x/33x provides a powerful, yet flexible IP communications solution, delivering excellent voice quality. The graphic display supplies content for call information, multiple languages, directory access, and system status. The SoundPoint IP 32x/33x supports advanced functionality, including multiple call and flexible line appearances, presence, custom ring tones, local conferencing, and Polycom's superb voice quality. This chapter contains: Parts List Assembling Your SoundPoint IP 32x/33x Phone Features of Your SoundPoint IP 32x/33x Phone Before You Use Your SoundPoint IP 32x/33x Phone

To customize your phone, refer to Customizing Your SoundPoint IP 32x/33x Phone on page 1-1. To read about the phone's basic features, refer to Using the Basic Features of Your SoundPoint IP 32x/33x Phone on page 3-1. To read about the phone's advanced features, refer to Using the Advanced Features of Your SoundPoint IP 32x/33x Phone on page 4-1. If you require additional information or assistance with your new phone, contact your system administrator.

1-1


========9========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Parts List
The following components are included in your SoundPoint IP 32x/33x package: Polycom SoundPoint IP 32x/33x phone

Dial Menu

Line 1 Line 2

1 4
GHI

ABC

2
JKL

3
Hold
MNO

DEF

5
TUV

6 9

PQRS

7

8

WXYZ

OPER

0



Handset and Handset Cord

1-2


========10========

Getting Started with Your SoundPoint IP 32x/33x Phone



Phone Base



Network / Power Cable



Quick Start Guide and registration card

Ensure that you have received each item. If you are missing any items, contact your system administrator.

Assembling Your SoundPoint IP 32x/33x Phone
This section describes how to assemble your SoundPoint IP 32x/33x phone. Topics include: Connect network and power source Connect handset and headset (optional) Attach phone base

If your phone is already assembled, go to Features of Your SoundPoint IP 32x/33x Phone on page 1-9.

1-3


========11========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Connecting Network and Power Source
Use Power over Ethernet (PoE) for network and power source connections unless otherwise directed by your system administrator. Note
The AC power adapter is a separate, optional accessory. Your system administrator will provide one if necessary.

Power over Ethernet Using a regular CAT5 cable (optional accessory from Polycom), the phone can be powered from a PoE (IEEE 802.3af) compliant switch or hub. To connect using a PoE source: Plug the supplied network cable between the LAN jack on the phone and an available power and data port on the in-line power switch.

IEEE802.3af compliant PoE Hub/Switch/Midspan Unit

Power Adapter
(Optional Accessory)

Optional PC Port (SoundPoint IP 33x Only)

Note

The SoundPoint IP 33x phones have an optional PC connection. The SoundPoint IP 32x phones do not. If you want to use the optional PC connection on the SoundPoint IP 33x, a separate ferrite clamp (not included) is required. Contact your system administrator.

1-4


========12========

Getting Started with Your SoundPoint IP 32x/33x Phone

Connecting the Handset and Optional Headset
To connect the handset and optional headset: 1. Connect the short straight end of the phone cord to the handset and the corresponding longer straight end of the cord to the handset jack on the back of the phone

2. Connect the headset (optional) to the headset jack on the back of the phone.

For information on supported headsets, go to www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical_Bulletins_pub.html and look for "Technical Bulletin 37477: Headset Compatibility List".

1-5


========13========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Note

For headsets terminated in RJ-9 modular jacks to be used with SoundPoint IP 320 and 330 phones, a separate Headset Jack Adapter (P/N 2457-11095-001) is required. To purchase the Headset Jack Adapter, contact your reseller. Plug the headset RJ9 jack into the adapter, and then plug the adapter into the 2.5mm port on the right side of the phone as shown below. The headset operates as before.

Note

If headsets are deployed in high static environments where users frequently disconnect and re-connect the headset to the phone, it is possible that the phone can be damaged by electrostatic discharge (ESD). You should take precautions to avoid excessive static buildup in your environment. This can include humidity control and removal of synthetic materials near the phone location. Antistatic spray applied to carpets in the workplace can reduce the level of static buildup.

Attaching the Base
Attach the phone base to the phone in one of the following ways: As a desk mount As a wall mount

For more detailed instructions, go to http://www.polycom.com/support/voip/and search for the "Wallmount Instructions for SoundPoint IP Phones" quick tip. To attach the base as a desk mount: 1. Place all cords in the recessed area above the modular jacks.

1-6


========14========

Getting Started with Your SoundPoint IP 32x/33x Phone

2. Align the protrusions on the bracket with their corresponding holes in the phone.

3. Snap them together to lock the bracket to the phone.

To attach the base as a wall mount: 1. Place all cords in the recessed area below the modular jacks.

1-7


========15========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

2. On the back of the phone, remove the key located behind the hook switch and reposition it so that the end tab (at a 450 angle) is facing up.

3. Using wall anchors (not included), fasten the base stand with the mounting tab facing up. 4. Align the base stand tabs with their corresponding insertion points on the phone, and then snap the phone into place (as shown).

Registering the Phone
Generally, your phone will be deployed with multiple other phones. In this case, your system administrator will configure the phone parameters beforehand, so that after you set up your phone, the phone will be registered and ready to use. If your phone is not part of a large phone deployment, your phone may not be registered after you set it up. Before you use your phone, you or your system administrator will have to register it. For detailed information on how to
1-8


========16========

Getting Started with Your SoundPoint IP 32x/33x Phone

register your phone after you install it, see Quick Tip 44011: Register Standalone SoundPoint IP, SoundStation IP, and Polycom VVXTM 1500 Phones available at http://www.polycom.com/usa/en/support/voice/soundpoint_ip/ VoIP_Technical_Bulletins_pub.html

Features of Your SoundPoint IP 32x/33x Phone
1 16 17 3 15
Dial Menu

2

14
Line 1 Line 2

4 5

13 12 1
4
GHI ABC

2
JKL

3
Hold
MNO

DEF

5
TUV

6 9

6 7 8

PQRS

7

8

WXYZ

11

OPER

0

10 The features of the SoundPoint IP 32x/33x phone are:

9

1. Message Waiting Indicator--This will alert you to voice and text (instant) messages. 2. Line Icons--Use these keys to activate up to lines that can be assigned to your phone. The associated icons represent: -- Registered line -- Registered shared line -- Unregistered line -- VoiceMail/Messages -- Speed-Dial

1-9


========17========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

-- Ringing -- Call in progress/Conference -- Call Forward -- Do Not Disturb -- Presence/BLF 3. Soft Keys--The screen will display labels for these keys, to identify their context-sensitive functions. 4. Line Indicators--Individual multi-color LEDs display the dynamic call state and remote user status (busy lamp field (BLF) and presence). The LED's indicate the following: -- Solid green--An active call is in progress. -- Fast flashing green--There is an Incoming (ringing) call. -- Flashing green--The call is held by the other party. -- Flashing red--The call is on hold. -- Solid red--The line is busy remotely (shared lines). 5. Line Keys and can be assigned to your phone. 6. Hold 7. Headset --Activate up to two lines that

--Holds an active call or resumes a held call. --Allows you to place and receive calls through an

optionally connected headset. 8. Speakerphone calls. 9. Hands-free Microphone--Picks up audio during hands-free calls. Place your phone on a hard, flat surface for best results. 10. Volume Keys headset, speaker, and ringer. 11. Microphone Mute --Adjusts the volume of the handset, --Allows for hands-free communication during

--Mutes local audio during calls.

12. Dial Pad--Provides the 10 digits, alphabetic characters, and special characters available in context-sensitive applications.

1 - 10


========18========

Getting Started with Your SoundPoint IP 32x/33x Phone

13. Feature Keys--Access important features using these keys. -- call list. -- --Accesses local (your phone) and call server features. , , , and (arrow keys) --Dials phone numbers or allows you to view the placed

14. Display Control Keys--Use

to scroll through the displayed information. Use (the Select key) to select a field of displayed data or enter edit

mode for some settings. 15. Speaker--For ringer and hands-free audio output. 16. Hookswitch 17. Graphic Display--Shows information about calls, messages, soft keys, time, date, and other relevant data. -- Important messages appear on the idle display through an animated scrolling list, which has precedence over the idle display. The following figures show a phone with four messages. The messages continuously scroll over the screen.

Before You Use Your SoundPoint IP 32x/33x Phone
To navigate through menus and to enter data, these are useful tips: Press to enter the basic settings menu or exit from any menu.

1 - 11


========19========

User Guide for the SoundPoint IP 32x/33x Desktop Phone



Press lists.

and

or hold

and

down to scroll through the

Note

Press the * key to page up. Press the # key to page down. These shortcuts can be used when lists appear on more than one page. However, these shortcuts do not work in the Contact Directory.



Use the dial pad keys to navigate through and make selections in numbered menu lists. The navigation guide icon in the top left-hand corner of the graphic display shows which arrow keys can be used at a particular sublevel. For example, the following figure shows that can be used at this point. , , , and

Note

After 20 seconds of inactivity, the menu system will also automatically exit to the idle display unless an edit session is in progress.



To enter text using the dial pad, press the number keys one or more times. For example, for `A' press `2' and for `C' press `222'. The text that can be entered by a key is shown beneath the entry line. This is true for all languages that can be displayed by the phone. When in text entry mode, the title will show whether keys will generate numbers (1) or characters (a or A).

1 - 12


========20========

Getting Started with Your SoundPoint IP 32x/33x Phone

The type of text entry available is displayed in the title line.

Switch between alphabetic (with and without an uppercase letter first) and numeric text entry by pressing the # key. Special characters like * and _ are considered alphabetic and appear when you press *, 1, or 0. Switch to uppercase by pressing Note and to lowercase by pressing .

Pressing the # also allows for URL or IP address entry. These options are only available to system administrators in appropriate menu items. For example, when editing directory contacts use "Abc", "abc", or "123" and when editing server addresses use "URL", "IP", or "123".

Note

To enter the "#" character, use the "*" key to access the appropriate special character. "#" cannot be entered using its own key because it is used to change text entry modes.



Press and hold (for one second) from the idle display: -- to point to the contact in the directory system where you can scroll through the individual fields. to the Placed Calls list when the phone is idle. Pressing number. Pressing number. again will call the currently highlighted

--

while in the dialing editor will dial the current



Press and hold the Backspace soft key to delete an entire field.

1 - 13


========21========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

1 - 14


========22========

2
Customizing Your SoundPoint IP 32x/33x Phone

You can customize your SoundPoint IP 32x/33x desktop phone by adjusting the setting for time and date, display contrast, and ring type, for example. You can add contacts to the phone's directory manually or from call lists. You can handle incoming calls from different contacts in different ways. This chapter provides basic operating instructions for customizing your SoundPoint IP 32x/33x phone. This chapter contains instructions on: Configuring Basic Settings Managing Call Lists Managing Contacts Managing Incoming Calls

Some customizations of your SoundPoint IP 32x/33x phone are performed by your system administrator. These include: Supporting Multiple Lines Supporting Multiple Line Keys Per Line Supporting Shared Lines

To read about the phone's basic features, refer to Using the Basic Features of Your SoundPoint IP 32x/33x Phone on page 3-1. To read about the phone's advanced features, refer to Using the Advanced Features of Your SoundPoint IP 32x/33x Phone on page 4-1. If you require additional information or assistance with your new phone, contact your system administrator.

2-1


========23========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Configuring Basic Settings
To configue basic settings, press , and then select Settings > Basic. You can configure the following basic settings: The appearance of the time and date Display contrast Headset Memory Mode Headset hookswitch selection Ring type Language support (localization) Directory search

You can mute the microphone and adjust the volume using separate keys.

Appearance of Time and Date
The time and date appears on the graphic display of the SoundPoint IP 32x/33x SIP phone. If the phone cannot obtain a time and date from a configured SNTP server, the display will flash. Contact your system administrator if either the time or date is incorrect. You have control over the format of the time and date display and can turn the display of time and date off. The default time and date format appears in the following figure.

To configure the time and date: 1. Press .

2. Select Settings > Basic > Preferences > Time & Date. 3. Select from Clock Date, Clock Time, Clock Order, or Enable/Disable. 4. Scroll through the options under each of these selections using the and .

2-2


========24========

Customizing Your SoundPoint IP 32x/33x Phone

5. Press

to confirm your choice.

For example, the following figure shows Clock Time.

6. Press

or

repeatedly to return to the idle display.

Display Contrast
To adjust the contrast on the display to a comfortable level: 1. Press .

2. Select Settings > Basic > Contrast. 3. Press the Up or Down soft keys to increase or decrease the display contrast.

4. Press the Save soft key to accept changes or 5. Press or

to cancel changes.

repeatedly to return to the idle display.

Headset Memory Mode
This feature is especially useful for permanent or full-time headset users. To permanently enable the Headset Memory Mode: 1. Press .

2. Select Settings > Basic > Preferences > Headset > Headset Memory. 3. Use the or to select Enabled.

2-3


========25========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

4. Press

to confirm your choice.

5. Press

or

repeatedly to return to the idle display.

Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off. To activate Headset Memory Mode:

>> Press

twice.

Pressing or Answer soft key to receive a call will now connect to the your headset automatically.

Headset Hookswitch
This feature enables electronic hookswitch support.
For information on supported headsets to provide electronic hookswitch features for placing, answering, and ending calls, go to www.polycom.com/support/voice and enter "Headset Compatibility List" in the Knowledge Base text box or contact your system administrator.

To select a headset that supports electronic hookswitch: 1. Press .

2. Select Settings > Basic > Preferences > Headset > Analog Headset Mode. 3. Use the or to select your headset and press the Select soft key.

4. Press

or the Exit soft key repeatedly to return to the idle.

2-4


========26========

Customizing Your SoundPoint IP 32x/33x Phone

Ring Type
You can select from the different ring types to distinguish between lines or to have a different ring from your neighbor's phone. You can set distinctive incoming ringing tones for contacts in your local directory (refer to Editing Contacts on page 1-3). To change the incoming ring to a desired sound: 1. Press .

2. Select Settings > Basic > Ring Type. 3. (Optional) If multiple lines are configured on your phone, first select the line to change from the list using 4. Using and and .

, select the desired ring type.

Press the Play soft key to hear the selected ring type.

5. Press the Select soft key to change to the selected ring type. 6. Press Note or repeatedly to return to the idle display.

If you configure your SoundPoint IP 32x/33x phone for silent ring, press the ringing Line key or the Answer soft key to answer the call. If your handset is off hook, the call is routed to the handset. If your handset is on hook, the call is routed to the speaker.

Language Support
Many languages are supported by the SoundPoint IP 32x/33x SIP phone. To change the language: 1. Press .

2. Select Settings > Basic > Preferences > Language.

2-5


========27========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

3. Scroll through the list of available languages.

4. Press

to confirm your choice.

Text that appears on the graphic display will change to the language of your choice. 5. Press or repeatedly to return to the idle display.

Directory Search
You can configure how the search of the local contact directory is performed. The local contact directory can be searched by first name or last name. To change the directory search parameter: 1. Press .

2. Select Settings > Basic > Preferences > Directory search.

3. Using

and

, select the directory search parameter.

Last name is the default directory search parameter.

4. Press

to select your choice.

5. Press the Yes or Cancel soft keys to accept or cancel changes.

2-6


========28========

Customizing Your SoundPoint IP 32x/33x Phone

Note

Depending on the size of your local contact directory, the reconfiguration may take a few minutes.

The phone will restart to set the new directory search mode if you pressed the Yes soft key.

Muting the Microphone
During a call, press . The Message Waiting Indicator turns red and a microphone on the screen indicates that the other party (or parties) cannot hear you. Microphone Mute applies to all modes: Handset, Headset, and Hands-free Speakerphone. You can still hear all other parties while mute is enabled. To turn off Microphone Mute, press again.

Adjusting the Volume
Press to adjust receiver volume during a call. Pressing these keys in the idle state adjusts the ringer volume. Note
To conform to regulatory requirements, handset and headset volume will return to a preset level after each call, but your system administrator can change this. Hands-free Speakerphone volume settings will be maintained across calls.

Managing Call Lists
A list of up to four current calls is maintained. You can scroll through this list using the and . Calls are ordered using the following priorities:

active, alerting, then held. Calls with the same priorities are ordered oldest first. If there are no current calls, this list is empty. Local lists of incoming--both missed and received calls--and outgoing (also known as placed) calls is maintained by the phone (up to 99 for each list). The initial view of both lists shows the list title and the first two calls in the list, where the first call is displayed in reverse video to indicate that it is currently selected. A symbol to indicate whether the call was answered missed is shown for each entry in the incoming list. or

2-7


========29========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Press the Callers soft key to view the Received Calls list (shown in the following figure).

Press figure).

to view the Placed Calls list (shown in the following

To manage the listed calls: To return the call: -- Press to return the call.

To return to the previous menu: -- Press .



To store the contact to the local contact directory: -- Press to select the entry, then press the Save soft key.

Note

Press the Info soft key to see the call information. The name is displayed. Access the other information by using the Up and Down arrow keys.



To delete the call from list: -- Press the Delete soft key. repeatedly to return to the idle display.

Press Note

You can manually clear the call lists. They are automatically cleared when you restart the phone.

Managing Contacts
You can enter 99 contacts in your phone's local contact directory.

2-8


========30========

Customizing Your SoundPoint IP 32x/33x Phone

You can dial or search for a contact in this directory. You may be able to add, edit, and delete contacts. You may have access to portions of your corporate directory through your phone. The contacts that you can see are determined by your system administrator. You can palce calls to contacts in your corporate directory. You may be able to add contacts from the corporate directory to your local contact directory.

Adding Contacts
You can add a contact manually or from a call list or from your corporate directory. Adding Contacts Manually New entries to the local contact directory are added to the top of the list. To add a contact to the local contact directory manually: 1. Press the Dir soft key. 2. Select the local contact directory if it does not appear automatically by pressing 3. Press . .

The Directory screen displays. displays at the top of the list.

Note

When adding the first contact, you do not need to press the Up arrow key.

4. Press

to add a new entry.

2-9


========31========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

5. Press

to enter a first name. .

Entry to this field is alphabetic as denoted by

6. Enter the first name of the contact from the dial pad.

7. Press the Ok or Cancel soft keys to accept or cancel changes. 8. Press to display the next field in the contact's entry. 9. Repeat steps 4 to 8 to enter the last name of the contact. 10. Repeat steps 4 to 8 to enter a contact number. This is a required field and it must be unique (not already in the directory). Entry to this field is number as denoted by .

11. Repeat steps 4 to 8 to change the Speed Dial Index if desired. It is automatically assigned to the next available index value. For more information, refer to Assigning Speed Dial Indexes on page 3-14. 12. Repeat steps 4 to 8 to change the Ring Type and Divert Contact if desired. These fields may be left blank. For more information on setting the Ring Type field, refer to Distinguishing Calls on page 2-17. For more information on diverting contacts, refer to Diverting Calls on page 2-18. 13. Repeat steps 4 to 8 to change the Auto Reject, Auto Divert, Watch Buddy, and Block Buddy if desired. Use settings. For more information on setting the Auto Reject field, refer to Rejecting Calls on page 2-17.
2 - 10

,

,

, or

to switch between Enabled and Disabled


========32========

Customizing Your SoundPoint IP 32x/33x Phone

14. Press

to end contact's data entry.

15. Press the Yes or Cancel soft keys to accept or cancel changes. 16. Press repeatedly to return to the idle display.

Adding Contacts From Call Lists

To add a contact to the local contact directory from a call list: 1. Do one of the following steps: a b 2. Use 3. Press Press the Callers soft key to view the Received Calls list. Press and to view the Placed Calls list. to scroll through the list to find the contact.

to select the entry.

4. (Optional) Press the Info soft key. The name is displayed. The number, time and date when the call started, and call duration are accessible through use of .

5. (Optional.) Press

repeatedly to select the phone number.

6. Press the Save soft key to save the contact in the local contact directory. 7. Press Note repeatedly to return to the idle display.

At this point, you may want to go to thelocal contact directory, check whether the contact was saved correctly, and add missing fields.

2 - 11


========33========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Add Contacts From Corporate Directory

To add a contact to the local contact directory from the corporate directory: 1. Press the Dir soft key. 2. Press , then press to select the corporate directory.

3. Search for the contact. Refer to Searching For a Contact on page 2-15. 4. Press .

The contact's information appears on the graphic display.

5. Press the Save soft key to save the contact in the local contact directory. "Entry saved" appears on the graphic display. Only the first name, last name, and phone number are saved. If the contact already exists in the contact directory, "Entry already exists" appears. 6. Press repeatedly to return to the idle display.

Editing Contacts
To edit a contact in the local contact directory: 1. Press the Dir soft key. 2. Select the local contact directory if it does not appear automatically by pressing 3. Use and . to scroll through the list to find the contact.

2 - 12


========34========

Customizing Your SoundPoint IP 32x/33x Phone

4. Press

to select the entry.

5. Press the Edit soft key.

6. Use the field.

and

to scroll through the fields, then press

to select

7. Make the desired changes. The Ok soft key is not displayed until a change has been made. The Cancel soft key in this context will cancel the edit session for the entry and return to the screen before the Edit soft key was selected (see step 3). Press and to place the cursor either at the beginning or end of to move to the next field.

the item respectively. Press

8. Press the Ok or Cancel soft keys to accept or cancel changes. 9. Press Note repeatedly to return to the idle display.

You can also edit a contact associated with a speed dial key by pressing and holding that speed dial key and then following the steps 5 to 7 above.

2 - 13


========35========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Deleting Contacts
To delete a contact from the local contact directory: 1. Press the Dir soft key. 2. Select the local contact directory if it does not appear automatically by pressing 3. Use 4. Press and . to scroll through the list to find the contact.

to select the entry.

5. Press the Delete soft key. The contact is deleted from the directory. The next entry in the directory appears. 6. Press repeatedly to return to the idle display.

Placing a Call to a Contact
Placing Calls From the Contact Directory

To place a call to a contact in the local contact directory: 1. Press the Dir soft key. 2. Select the local contact directory if it does not appear automatically by pressing 3. Use 4. Press and . to scroll through the list to find the contact. or lift the handset.

2 - 14


========36========

Customizing Your SoundPoint IP 32x/33x Phone

Placing Calls From the Corporate Directory

To place a call to a contact in the corporate directory: 1. Press the Dir soft key. 2. Select Corporate Directory. 3. Search for the contact. Refer to Searching the Corporate Directory on page 2-15. 4. Press or lift the handset.

Searching For a Contact
Searching the Contact Directory

To search for a particular contact in the local contact directory: 1. Press the Dir soft key. 2. Select the local contact directory if it does not appear automatically by pressing .

3. Search for a contact using the dial pad. You can change the directory search parameter used. By default, it is the contact's last name. For more information, refer to Directory Search on page 2-6. The first time a dial pad key is pressed, the first entry whose last name starts with a character that matches the first letter on the key label will be retrieved. The second key press repeats the process using the second letter on the key and so on. For example, to find the first directory entry whose last name starts with J, press the 5 key once. To find the first entry whose last name starts with R, press the 7 key three times. Searching the Corporate Directory

To search for a particular contact in the corporate directory: 1. Press the Dir soft key. 2. Select the local contact directory if it does not appear automatically by pressing .
2 - 15


========37========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Note

You can enable your phone to save Corporate Directory search results, and to remember the last person you viewed in the directory. Whenever you redisplay Corporate Directory, the last person you viewed will display. If you searched for a person, the results of the last search you submitted will display. To enable this feature, press the Menu key, and then select Settings > Basic > Preferences > Corporate Directory > View Persistency. Select Enabled, press the Select soft key, and then press the Menu key to exit the menu.

3. Search for the contact in one of the following ways: -- In the search line, enter the first few characters of the contacts's last name using the dial pad. For example, to search for James Woller, enter wo in the search line. -- Press the Submit soft key. In this example, James Woller appears in the search results..

-- Press the AdvFind soft key, enter search values in the displayed fields. For example, enter Smith as the last name.

-- Press the Submit soft key. In this example, Bob Smith appears in the search results..

You can dial any successful matches from the resulting information on the graphic display.

Managing Incoming Calls
You can distinguish incoming calls from contacts in your directory by setting up distinctive rings, sending them directly to your voice mail, or by transferring them directly to another party.

2 - 16


========38========

Customizing Your SoundPoint IP 32x/33x Phone

Distinguishing Calls
You can customize your phone so that you can distinguish different parties by ring type. To set a distinctive ring type for a particular contact: 1. Press the Dir soft key. 2. Use 3. Press and to scroll through the list to find the contact.

to select the entry.

4. Press the Edit soft key. 5. Press repeatedly until the Ring Type field is displayed.

6. Press

to edit the Ring Type.

7. Enter the number corresponding to one of the ring types available. For more information, refer to Ring Type on page 2-5. 8. (Optional) To remove an existing value, press . 9. Press the Ok or Cancel soft keys to accept or cancel changes. 10. Press Note repeatedly to return to the idle display.

This feature is local to the phone, and may be over-ridden by your organization's settings. For more information, contact your system administrator.

Rejecting Calls
You can customize your phone so that incoming calls from a particular party are immediately sent to your voice mail. Note
Rejecting calls is not available on shared lines.

To send incoming calls from a particular contact directly to voice mail: 1. Press the Dir soft key. 2. Use and to scroll through the list to find the contact.

2 - 17


========39========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

3. Press

to select the entry.

4. Press the Edit soft key. 5. Press repeatedly until the Auto Reject field is displayed.

6. Press

, and then

to change between Disabled and Enabled.

7. Press the Ok or Cancel soft keys to accept or cancel changes. 8. Press repeatedly to return to the idle display.

Diverting Calls
You can customize your phone so that incoming calls from a particular party are transferred directly to a third party. To divert incoming calls from a particular contact: 1. Press the Dir soft key. 2. Use 3. Press and to scroll through the list to find the contact.

to select the entry.

4. Press the Edit soft key. 5. Press repeatedly until the Divert Contact field is displayed.

6. Press

.

7. Enter the number of the party to whom you want to divert the call.

2 - 18


========40========

Customizing Your SoundPoint IP 32x/33x Phone

8. Press the Ok or Cancel soft keys to accept or cancel changes. 9. Scroll down to the Auto Divert field. 10. Press , and then to change between Disabled and Enabled.

11. Press the Ok or Cancel soft keys to accept or cancel changes. 12. Press Note repeatedly to return to the idle display.

Dual-tone multi-frequency (DTMF) signaling is not available while a call is incoming. You may resume DTMF signaling by pressing the Reject soft key (for private lines) or the Ignore soft key (for private and shared lines). For more information, contact your system administrator.

System Customizations
The following section details customizations of your SoundPoint IP 32x/33x phone that are performed by your system administrator.

Supporting Multiple Lines
Your SoundPoint IP 32x/33x phone can support up to 2 lines. Typically, the top-most Line Key is reserved for the principal directory number (DN) of the phone. Depending on how your phone is configured, the display could resemble one of the following figures:

2 - 19


========41========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Supporting Multiple Line Keys Per Line
Each line on the phone can be configured to have more than one Line Key associated with it. This enhances call visualization and simplifies call handling. If this is the case, the display could resemble the following figure:

Incoming calls to this line will be distributed evenly among the available Line Keys. Similarly, outgoing calls will be distributed. The SoundPoint IP 32x/33x combines the call appearances for multiple line keys into a single call list. The line key that a call belongs to is indicated by the reverse colored icon.

Supporting Shared Lines
Your SoundPoint IP 32x/33x phone supports shared lines. A shared line is indicated by a different line icon. In the following figure, the line 3413 is private and the line 3416 is shared.

If two phones share a line, an incoming call to that number will cause both phones to ring. The call can be answered on either phone but not both. Calls on shared lines can be transferred, placed on hold, or added to a conference. Note
Shared lines are an optional feature and may not be supported on your particular system. For more information, contact your system administrator.

Note

Call Forwarding is not available on shared lines. Do Not Disturb (DND) on shared lines disables the ringing option only, the visual indication is still in place.

2 - 20


========42========

3
Using the Basic Features of Your SoundPoint IP 32x/33x Phone

Your SoundPoint IP 32x/33x phone is designed to be used like a regular phone on a public switched telephone network (PSTN). You can place calls, transfer a call to someone else, or conduct a conference call. At any time, only one active call may be in progress on your phone. The active call is the one that has audio associated with it. There may be up to three other calls on hold or in an "Incoming call" or "Ringing" state on a particular line. Use and to switch between these calls. With two lines, there can be maximum of eight calls or four conferences on your phone. This chapter provides basic operating instructions for the SoundPoint IP 32x/33x phone. This chapter contains instructions on: Placing a Call Answering a Call Ending a Call Redialing Placing a Call on Hold Setting Up Conferences Transferring Calls Forwarding Calls Enabling Do Not Disturb Assigning Speed Dial Indexes Using Voice Mail

3-1


========43========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

To customize your phone, refer to Customizing Your SoundPoint IP 32x/33x Phone on page 2-1. To read about the phone's advanced features, refer to Using the Advanced Features of Your SoundPoint IP 32x/33x Phone on page 4-1. Review useful tips about the phone in Before You Use Your SoundPoint IP 32x/33x Phone on page 1-11. If you require additional information or assistance with your new phone, contact your system administrator.

Placing a Call
You can place a call in many ways using your SoundPoint IP 32x/33x phone: Using the handset Using the speakerphone Using the headset Using Using or

You can also dial the number first, and then choose the method you will use to speak to the other party. To call a speed dial number, use the dial pad to enter the speed dial index followed by the # key, and then press place a call. or pick up the handset to

You can search the local contact directory or the corporate directory and dial from the search results page. During a call, you can alternate between Handset, Headset, or Hands-Free Speakerphone modes by pressing the or keys, or picking up the handset. Call duration on an active call is monitored through a local call timer. This is visible within the active call window on the graphic display. In the figure below, the call to James Dean has lasted 2 hours 48 minutes 23 seconds so far.

3-2


========44========

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

To place a call using the handset: 1. Do the following steps in any order: -- Pick up the handset.

-- Dial the desired number using the dial pad. Note
URL or IP dialing is not supported on registered phones. If your phone is intentionally unregistered, the default dialing mode is by URL.

To place a call using Hands-Free Speakerphone mode: Note
If "Handsfree mode disabled" appears on the graphic display after you press the speakerphone key, your system administrator has disabled the speakerphone on your phone.

1. Do one of the following steps: a With the handset on-hook, press or the NewCall soft key to obtain dial tone. Dial the desired number using the dial pad. b With the handset on-hook, dial the desired number using the dial pad. Press , , or . , , ,

To place a call using the headset: 1. Do one of the following steps: a With the optional headset connected, press ,

, or the NewCall soft key to obtain dial tone. Press .

Dial the desired number using the dial pad.

3-3


========45========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

b

With the optional headset connected, dial the desired number using the dial pad. Press . .

c

Press

You will hear a dial tone. You can enter the desired number now. Note
To permanently enable your headset, refer to Headset Memory Mode on page 2-3.

To place a call using the Dial key: 1. Do one of the following steps: a b 2. Use 3. Press Press the Callers soft key to view the Receive Call list. Press and to view the Placed Call list. to scroll through the list to find the contact. to complete the call.

Answering a Call
When you are not in another call, you can answer a call in three basic ways using your SoundPoint IP 32x/33x phone: Using the handset Using the speakerphone Using the headset

The steps for answering an incoming call when you are in another call are different if your phone is configured for: A single Line Key per line

3-4


========46========

Using the Basic Features of Your SoundPoint IP 32x/33x Phone



Multiple Line Keys per line

If your phone is configured with multiple call appearances, refer to Using Multiple Call Appearances on page 4-3 for instructions on how to answer a call. Note
Incoming calls may be ignored by pressing the Reject soft key (for private lines) or the Ignore soft key (for private and shared lines). When your SoundPoint IP 32x/33x phone is configured for silent ring, press the ringing Line key or the Answer soft key to answer the call. If your handset is off hook, the call is routed to the handset. If your handset is on hook, the call is routed to the speaker.

Note

Dual-tone multi-frequency (DTMF) signaling is not available while a call is incoming. You may resume DTMF signaling by pressing the Reject soft key (for private lines) or the Ignore soft key (for private and shared lines). For more information, contact your system administrator.

Answering When Not in Another Call In all cases, the active call will appear on the graphic display showing call duration and destination. To answer a call using the handset: Pick up the handset.

To answer a call using Hands-Free Speakerphone mode: Note
If "Handsfree mode disabled" appears on the graphic display after you press the speakerphone key, your system administrator has disabled the speakerphone on your phone.



Do one of the following steps: -- Press . -- With the handset on-hook, press opposite the incoming call (where the line status indicator is flashing green). -- Press the Answer soft key.
3-5


========47========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

To answer a call using the headset: Press to answer the call through an optionally connected headset. or the Answer

If Headset Memory Mode is activated, press soft key. Answering When in Another Call

You are busy on an active call and a second incoming call arrives on the same phone number. If your phone is configured for a single Line Key per line: -- The second call may cause a call waiting tone to be played and you see the second call appearance. The call waiting prompt identifying the incoming caller appears for 10 seconds only. You can ignore, answer, or reject the call. (The Reject soft key on private lines only.) -- After this point the active call is in focus and the user must scroll to the incoming call appearance to Answer If your phone is configured for multiple Line Keys per line: -- The second call will cause a call waiting tone to be played, the second Line Key indicator to fast flash green, and an incoming call icon appears. The call waiting prompt identifying the incoming caller appears for 10 seconds only. You can ignore, answer, or reject the call. (The Reject soft key on private lines only.) If your phone is configured for shared lines: -- The second call will cause a call waiting tone to be played, the second Line Key indicator to fast flash green, and an incoming call icon appears on the second Line Key. The call waiting prompt identifying the incoming caller appears for 10 seconds only. Note
Pressing the Ignore soft key will stop the ringing for that call.

To answer an incoming call on a line configured for a single Line Key: Note
Use this procedure after the call prompt disappears. The call waiting prompt interrupts the active call for 10 seconds, where the incoming call can be immediately dealt with.

1. Press

to place the original call on hold.

3-6


========48========

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

2. Press

to access the new call.

Soft key labels are updated on the display showing Ignore, Answer, and Reject. 3. Answer the incoming call. This places the original call on hold and refreshes the soft key labels. To answer an incoming call on a line configured for multiple Line Keys: Note
Use this procedure after the call prompt disappears. The call waiting prompt interrupts the active call for 10 seconds, where the incoming call can be immediately dealt with.



Do one of the following steps: -- Answer the call by pressing with the second incoming call. or associated

The first call is put on hold and the second call is answered. -- Press to put the original call on hold.

Soft key labels are updated on the display showing Ignore, Answer, and Reject. Answer the incoming call. This places the original call on hold and refreshes the soft key labels. Answering a call on shared line is no different than on private line, except that there is no Reject soft key and another person on the shared line might answer the call.

Ending a Call
To end a call: Do one of the following steps: -- Press the EndCall soft key. -- Replace the handset. -- Press if in Hands-free Speakerphone Mode, or Headset Mode. if in

3-7


========49========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Redialing
To redial any call placed from your phone: Refer to Placing a Call on page 3-2.

Placing a Call on Hold
During a call, press . This will be indicated on the graphic display by the hold icon as the line indicator.

Press icon (one of

again or the Resume soft key to resume the call. The active audio , , or ) appears as the line indicator.

When a call has been on hold for an extended period of time, both visual and audible alerts appear. Contact your system administrator to determine if this feature is enabled/disabled, what the time period is, and what sound effects are available. When active on a call, the sound effects are played at a volume that is typically lower than the normal ringer volume. Note
As using the Hold feature typically generates music or a beeping tone, avoid putting a conference call on hold.

Multiple Calls on Hold If multiple calls are on hold, use and to switch between the calls,

then press the Resume soft key to retrieve the desired call.

If two or more calls are on hold, an indication appears on the graphic display, for example "3/4", indicating that this is the third call out of four calls.

3-8


========50========

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

If calls are on hold on more than one Line Key, all calls are combined into a single call list. The Line Key that a call is associated with is indicated by the line icon in reverse colors. Pressing a Line Key with calls on hold will place the current active call on hold and resume the first call on that Line Key.

Setting Up Conferences
You can create a conference with other parties using the phone's local conference feature. To set up a conference: 1. Call the first party.

Note

You can either dial the phone number directly or search for the number in the Contact Directory or Call Lists. For more information, refer to Placing a Call on page 3-2, Searching For a Contact on page 2-15, or Managing Call Lists on page 2-7.

2. Press Conf soft key to create a new call. The active call is placed on hold.

3. Call the second party. 4. When the second party answers, press the Conf soft key again to join all parties in the conference.

To split a conference call: Press the Split soft key to split the conference. Both parties will be on hold.
3-9


========51========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

To set up a conference call using the Join soft key: When you are in an active call: a If you have one call on hold (on the same line or other line), use to go to the call on hold, then press the Join soft key. A conference is created with the active call, the call on hold and yourself. b If you have more than one call on hold, use and to switch

to the desired call on hold, press the Join soft key. A conference is created with active call, the call on hold and yourself. To end a conference call: Press the EndCall soft key or hang up. The other parties will continue to be connected.

Transferring Calls
A call can be transferred in one of three ways: Consultative transfer--The party to whom you want to transfer the call answers their phone before you transfer the call or hang up. You can consult with them before completing the transfer. -- To transfer a call: on page 3-11. Blind transfer--The call is automatically transferred after you dial the number of the party to whom you want to transfer the call. -- To perform a blind transfer: on page 3-11. Attended transfer--The parties are automatically connected to each other after you exit the conference. -- Set up a conference call and then end your participation. For more information, refer to Setting Up Conferences on page 3-9.

3 - 10


========52========

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

To transfer a call: 1. During a call, press Trans soft key. The active call is placed on hold.

2. Enter the number to which you want to transfer the call. A normal (or consultative) transfer is assumed. Note
Access to the local contact directory, corporate directory, or received callers list at this point will be added in a future release. For more information, contact your system administrator.

3. As soon as the ring-back sound is heard or after the party answers, press Trans soft key to complete the transfer. You can talk privately to the party to which you are transferring the call before the transfer is completed. If you are using a handset, the transfer can be completed by putting the handset on the cradle. You can cancel the transfer before the call connects by pressing the Cancel soft key. To perform a blind transfer: 1. During a call, press the Trans soft key. 2. Press the Blind soft key.

3. Do one of the following steps: a b Enter the number to which you want to transfer the call. Press the Dir soft key to access the local contact directory, use and c to access the contacts, and then press .

Press the Dir soft key to access the corporate directory, search for the desired contact, and then press .
3 - 11


========53========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

d

Press the Callers soft key to access the Received Call list, use and to access the contact, and then press to access the Placed Call list, use . . and

e

Press

to access the contact, and then press

At this point, the call is connected to the number to which you are transferring them.

Forwarding Calls
You can configure your phone so that all incoming calls are forwarded to another party (known as static forwarding). All incoming calls can be forwarded to another party while Do Not Disturb is enabled on your phone. For more information, contact your system administrator. Note
Call Forwarding is not available on shared lines. This feature is local to the phone, and may be overridden by call server settings. For more information, contact your system administrator.

Static Forwarding

To enable call forwarding to another party: 1. Press and select Features > Forward.

2. (Optional) If multiple lines are configured on your phone, select the line to forward from the list using and .

3 - 12


========54========

Using the Basic Features of Your SoundPoint IP 32x/33x Phone

3. Using then press

and

, select the forwarding type you want to change and . The options are:

-- Always--For all incoming calls -- No Answer--Once all options to accept calls have been taken -- Busy--When you are already in a call 4. Depending on your selection: a b If you select Always, enter a number to forward all future incoming calls to. If you select No Answer, enter a number to forward all unanswered incoming calls to and how many rings to wait before forwarding (one ring is approximately six seconds). A value of 2 is recommended. If you select Busy, enter a number to forward all future incoming calls to when you are already in another call.

c

Note

You can also enter the SIP URL or IP address. For more information on using a SIP URL or IP address, refer to Placing a Call on page 3-2

5. Select the Enable soft key to confirm call forwarding. Select the Exit soft key to cancel any changes. The idle display returns with a moving arrow as the line label to confirm call forwarding is enabled.

To disable call forwarding: 1. Press and select Features > Forward. and .

2. (Optional) If multiple lines are configured on your phone, select the line to forward from the list using 3. Using and

, select the forwarding type you want to change and

then press the Select soft key. 4. Press the Disable soft key to turn off call forwarding. The idle display returns and the regular icon appears as the line indicator.

3 - 13


========55========

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Enabling Do Not Disturb


Aby uzyskać więcej informacji, prosimy o pobranie pliku z instrukcjami.

Linki sponsorowane
Instrukcja Podgląd użytkownika
Typ Telefon komórkowy
Nazwa POLYCOM SOUNDPOINT IP 321
Model SOUNDPOINT IP 321
Rozmiar pliku 1580 KB
Number of pages 90 pages
format pliku pdf
Język Telefon komórkowy POLYCOM SOUNDPOINT IP 321 English English, Telefon komórkowy POLYCOM SOUNDPOINT IP 321 Nederlands - Dutch Nederlands - Dutch,